Most common
problems & fixes

Is your AEG FAVORIT 40730 letting you down? Don't worry, we're here to help. Check out our list of the most common problems and how to fix them yourself.

Dishwashing cycle not starting

The mains plug is not plugged in or a fuse in the house’s wiring system is defective

Plug in mains plug or replace the defective fuse

Dishes are not clean

The wrong dishwashing cycle was selected or dishes were loaded improperly

Select the correct cycle and ensure dishes are loaded properly without overloading the baskets

Scale deposits on dishes

The special salt dispenser is empty or the water softening system is incorrectly set

Refill the salt dispenser or adjust the water softening system settings

Water not draining

The sink outlet is blocked or the water drain hose is not positioned correctly

Clean the sink outlet and check the hose installation

Quick setup

Follow these easy steps to get your AEG FAVORIT 40730 Dishwasher up and running in no time.

1

Transport and Positioning

Only transport the dishwasher in an upright position to prevent salt water from running out. Install the dishwasher on a firm, level floor and adjust it to ensure stability in all directions.

2

Electrical Connection

Ensure the mains plug is accessible post-installation. Avoid using multi-way plugs or extension cables. The dishwasher’s cable must be replaced only by the Customer Care Department or a registered electrician.

3

Water Connection

Connect the dishwasher to cold or hot water supplies up to 60°C. Do not connect to open hot water appliances. Ensure the water inlet hose is not kinked or crushed.

The Space Saver

This dishwasher is like a magician's hat—it's compact, yet it can hold up to 12 place settings! Perfect for dinner parties or big family meals.

Speedy Gonzales

Got a last-minute dinner? No problem! The AEG FAVORIT 40730 has a 30-minute quick wash to save the day.

Troubleshooting

The AEG FAVORIT 40730 Dishwasher has some known problems that occur often. Here are some easy to do solutions for the problems or error codes your AEG might be giving you.

Problems with water inlet

The tap is blocked or furred with lime-scale. Clean the tap to ensure water can flow smoothly into the appliance.

Anti-flood system triggered

The indicator for the end of the dishwashing cycle is flashing in rhythm 3 short light signals one after another. Check the appliance for any leaks and contact the Customer Care Department if necessary.

Sink outlet blocked

The programme indicator for the selected dishwashing cycle is flashing, the indicator for the end of the dishwashing cycle is flashing in rhythm 2 short light signals one after another. Clean out the sink outlet to ensure proper drainage and check hose installation for any misplacement.

Installation and Safety

The AEG FAVORIT 40730 Dishwasher must be installed on a firm floor and adjusted to ensure stability and level placement. The appliance should only be transported in an upright position to prevent salt water leakage. Ensure multi-way plugs or extension cables are not used to avoid fire hazards from overheating.

Control Panel and Functions

The dishwasher features an ON/OFF button, program selection buttons, and function buttons for additional settings like water softener adjustments. The program progress is displayed, and the end of the cycle is indicated. The control panel also allows setting a delay timer for cycle start.

Dishwashing Cycles

The dishwasher offers various cycles such as Intensive 70° for heavily soiled cookware, Normal 50° for normally soiled dishes, and Energy Saving 50° for temperature-sensitive crockery. Consumption values vary with cycle length, energy, and water usage.

Child Safety

Packaging should be kept away from children to prevent suffocation risks. Children should not use the dishwasher unsupervised. Ensure children and pets do not climb into the dishwasher.

Technical Specifications

This dishwasher is a free-standing appliance with dimensions of 850 x 598 x 598 mm (H x W x D), a capacity for 12 place settings, and it operates under a water pressure of 1-10 bar. It requires an electrical connection of 230 V, 10 A.

Using Detergents and Additives

For first-time use, if using a 3 in 1 detergent, do not fill up with special salt or rinse aid. The dishwasher has dispensers for special salt, detergent, and rinse aid. Adjust the water softener to match local water hardness for optimal results.

Care and Cleaning

Do not use aggressive cleaners; instead, clean controls with a soft cloth and warm water. Regularly check and clean filters to ensure effective washing. Remove the lower basket to access and clean the filter system.

Troubleshooting and Faults

For minor malfunctions, consult the control panel indicators. In case of faults, cancel the cycle, switch the appliance off and on, and reselect the cycle. Persistent faults should be reported to Customer Care with the specific fault message.

Maintenance

Check out our tips to prevent many common issues and extend the life of your AEG Dishwasher.

Regular Cleaning and Maintenance

Ensure that the dishwasher's controls are cleaned with a soft cloth and warm water. Regularly check and clean the internal dispensers, door seal, and water inlet filter to prevent dirt build-up. Avoid using aggressive cleaners.

Check Filters

Regularly inspect and clean the filters at the base of the washing compartment. Dirty filters can spoil wash results. Remove the lower basket, turn the filter handle about ¼ turn anticlockwise, and remove the filter system for cleaning.

Spray Arm Maintenance

Check the jets in the spray arms for blockages regularly. This ensures proper water flow and cleaning efficiency. Clean any blockages that may be present in the spray arm jets.

Avoid Overloading

Do not overload the dishwasher baskets. Ensure dishes are loaded in a way that allows the dishwashing water to reach all items for effective cleaning.

Use Correct Detergents

Always use good quality detergent and ensure the correct amount is used. This prevents issues with cleaning performance and residue on dishes.

)

tech specs

Need more info? Please have a look at the tech specs of the watch. We’ve used Latest technology & quality materials

Technical Specifications

Energy and Performance

Features

AEG FAVORIT 40730: A Comprehensive Overview

The AEG FAVORIT 40730 is a highly efficient and robust dishwasher designed to meet the demanding needs of modern households. With a capacity to accommodate 12 place settings, this freestanding appliance is perfect for families and those who entertain frequently. It features a user-friendly control panel with program buttons and function buttons that allow you to select from various dishwashing cycles tailored to different levels of soiling. The appliance is engineered with a top spray nozzle, upper basket spray arm, and a floor spray arm to ensure thorough cleaning. Its energy-efficient design boasts an electrical connection requirement of 230V and includes a delay timer for added convenience. The AEG FAVORIT 40730 operates at water pressures ranging from 1 to 10 bar and is built to comply with several EU Directives, ensuring both safety and performance. Its sleek design and reliable functionality make it a top choice for those seeking a durable and effective dishwashing solution.